Kayak Warranty & Care
 Transport
All Viking kayaks can be transported on top of a car, using a roof rack. Kayaks should be face down or, if there are two, on their sides or stacked face down. Padding or clips should be used to protect the kayak from rubbing on metal. To minimise movement, tie the kayak twice across (using the scupper holes if holes if convenient) and from the front and rear.
If transporting inside a van or truck, protect the kayak from hard metal flooring.
Storage
Although Viking kayaks are made from factor 11 UV rated polyethylene, it is best to store your craft out of the sun to maintain optimum condition.
It is advisable to drain and clean the kayak before lengthy storage. Storing face down, on edge or on a wall rack are all recommended. If storing right side up on it’s hull, ensure the surface is flat.
Cleaning
Drain your kayak after use by opening the bunghole and placing the kayak on end. If it has been in salt water, it's a good idea to hose it with fresh water.
The polyethylene has a slightly rough surface which can trap grime. At least a couple of times a season and before storing, gently scrub (or pressure hose) the kayak using dishwashing detergent and warm water.
Repairs & Warranty
Vikings' linear polyethylene construction is very tough and can withstand most knocks and bumps that are part of normal use. To remove small dents, try putting the kayak out in the sun for a day. The plastic's memory should restore the original shape.
If it does sustain serious damage (perhaps as the result of an accident, vandalism or misuse) it is weldable for repair. Contact us, or your local dealer for referral to an experienced tradesperson.
Viking kayaks have a 10 year warranty on the hull. This excludes intentional or unintentional damage caused by sharp objects or dragging over rough surfaces.
|
