Laybuy Supported
contact us
Kayak Fishing - Running Rig *Drift Chute NOT included

Description

Adjustable Multi-Fit Kayak Running Rig (Anchor Trolley). 
This will fit most kayaks.

***Drift Chute/Drogue Sold separately***

Made with Stainless Steel fittings and using Spectra Cord (a non-stretch cord).

This is a must for the serious kayak fisherman. 

A Running Rig is used in conjunction with an anchor or Drift Chute (Drogue) and can be set off the front or the rear of the kayak simply by pulling the cord through the pulleys.

The Running Rig comes standard with saddles and screws to fit the brass inserts that may be moulded into your kayak.
*If your kayak doesn't have inserts fitted, ask for "well nuts" to be supplied. Well Nuts are self-sealing rubber nuts that fit pre-drilled 10mm holes.

How to fit to your kayak:

  1. Attach the pulleys to your kayak using the stainless saddles and screws.
  2. Run the cord end with the loop up through one pulley and down through the other.
  3. Thread the stainless clip through the loop at the end of the cord.
  4. Tension the cord so it runs high along the side of the cockpit and lock in place by tying a series of four half-hitch knots.

PLU 5860

 

$89.00 (RRP)